tuningblog.eu Your magazine about tuning the car
Once the full one Novitec Program for this McLaren 570 Spider! Something similar was probably the order from the owner of the British super sports car who handed the vehicle over to the Swiss tuner, cartech.ch. And of course the full program also includes an increase in performance and, of course, the delicate Novitec MC1 forged wheel set. But in turn! The 570 also shows up with the full aerodynamic kit from Novitec Rosso from the Bavarian Stetten. It includes a spoiler lip in fine carbon fiber that hugs the entire apron of the 570 Spyder. And the sill swords and the fixed gooseneck rear wing shine in the noble carbon fiber. The same applies, of course, to the carbon panels on the side that complete the rear apron.
638 PS Novitec McLaren 570 Spider
The Team of autokosmetik.li was responsible for the full foiling of the 570 Spyder and missed the fast British a dull gray body with lots of accents in glossy black. And of course they were also responsible for the PinStripe in orange which can be seen everywhere on the 570. And as already mentioned, there was the ultra-light MC1 forged wheel set from Novitec. It is installed on the 570 in the format 9Jx20 front inch with 235 / 30 ZR 20 high-performance tires and the rear axle fill huge 11Jx21 inch rims with 305 / 30 ZR 21 slippers. So that the rims sit consistently and precisely in the wheel arch, and the 570 circles a little more aggressively around the corner, cartech also built a set of Novitec sport springs for lowering by about 30mm. In combination with the original lift system, there is still the possibility to get into a parking garage or a car park without scratching with the lowering. And finally, of course, there would be the increase in performance.
Forged wheels in 20 & 21 inches
Using the NOVITEC N-TRONIC module, the extra power can be conveniently activated in the Active Dynamic Panel of the 570 and enables 638 PS & 688 NM torque to be called up. Enough power to accelerate to 3 km / h in just 100 seconds and easily reach a top speed of 335 km / h. All this is underpinned by a powerful sounding high-performance exhaust system that is installed completely insulated and optimizes the heat balance in the engine compartment. However, we currently have no information on whether a variant made of stainless steel or Inconel was installed. Either way, a perfectly refined bullet that will probably annoy some 650S. If we receive timely information on further changes not mentioned so far, there will of course be an update for this report. It is best to subscribe to our feed and if there is something new you will be informed immediately. We hope you enjoy looking at the pictures.
Photos: cartech.ch (Switzerland)
These are the details of the McLaren 570 Spider:
- NOVITEC SichtCarbon aerodynamic components
- Front spoiler
- rear wing
- Carbon rocker panels
- Carbon covers for the side air inlets
- Carbon side panels for the rear apron - High-tech forged wheels in 20 and 21 inches (five double spokes, 9Jx20 with 235 / 30 ZR 20 high-performance tires and 11Jx21 with 305 / 30 ZR 21 tires)
- Lowering by approx. 30 millimeters with NOVITEC sport springs
- Increase in performance with the NOVITEC N-TRONIC module to 638PS / 688NM
- about 3,0 seconds on Tempo 100
- Top speed: 335 km / h
- NOVITEC high-performance exhaust system (stainless steel or INCONEL) with tapered tailpipes on the left and right and with sports catalytic converters
- special vehicle wrapping by autokosmetik.li with accents in orange inspired by the interior
We still have many thousands more tuning reports on tuningblog.eu, if you wanted to see an excerpt then just click HERE, And also from the tuner cartech we have a lot more cars, following a small excerpt:
Novitec McLaren 570 Spider
"Tuningblog.eu" - we keep you up to date on the subject of car tuning and car styling with our tuning magazine and present you the latest tuned vehicles from all over the world every day. It's best to subscribe to ours Feed and will automatically be informed as soon as there is something new for this post, and of course also to all other contributions.
