Monday, March 25, 2024
Menu

Widebody & 4WD! The Speedkore 1.525 PS Dodge Charger

Reading time 5 Min.

Widebody & 4WD! The Speedkore 1.525 PS Dodge Charger

Here comes the ultimate family car for fathers who have just wondered how to make kid and cone in the Resurrection Chevrolet Camaro ZL1 1LE squeezes or if there is really only the way of a pure track tool like that 2020 Mopar Dodge / SRT Challenger Drag Pak remains. The SpeedKore Performance Group has built the solution in cooperation with HP Tuners in the form of a Dodge Charger with full back seat, large luggage compartment and practical AWD all-wheel drive. And by the way there is also "at least“1525 measured PS. ONE THOUSAND FIVE HUNDRED TWENTY-FIVE !!! These are almost the key data of a Bugatti Chiron and also a 2,8 million euro Königsegg Jesko is only marginally stronger with 1.622 PS. And the “SpeedKore Demon Charger” could do even more if you let it. The 6,2-liter V8 engine, which has been converted to biturbo, already delivers the power at 26 PSI (about 1,79 bar) and it would even be able to go a step further by increasing the boost pressure.

2 x 6875 Precision Billet T4 Turbos

Widebody & 4WD! The Speedkore 1.525 PS Dodge Charger

Incidentally, the engine is almost identical in construction to that presented by the 2018 Full Carbon Dodge Challenger with 1.400 PS, Instead of the two 6875 Precision Billet T4 turbochargers, one now relies on two ball-bearing Precision 6466 turbos, thus making the factory-made compressor disappear again. Added to this is a Fore fuel system with three fuel pumps that send liters of E85 fuel to the large Injector Dynamics 1700cc injectors. And of course, all the components in the engine, such as intake, the entire management for cooling, the Thitek cylinder heads and the MagnaFlow sports exhaust system specially adapted for this vehicle, of course, of course. And the Traction Products AWD four-wheel drive is not about the Pole. Here, too, almost all components have been correspondingly strengthened in order to deliver the insane performance permanently and without defects to the wheels.

significantly reinforced gearbox on board

Widebody & 4WD! The Speedkore 1.525 PS Dodge Charger

And the same applies to the Hellraiser Performance transmission including FTI torque converter and the carbon fiber drive shaft coupled to it. Everything was built just for this car. In the end you are not finished with the engine according to your own statement and expect a "slight" increase in performance with a few changes. We assume that around 1.650 hp are probably not unrealistic. And the body of the BiTurbo AWD Dodge Charger is also a real eye-catcher. On the basis of a current model, a complete carbon widebody kit was manufactured in an elaborate 3D process, so that it could come straight from the factory and that 2020 Dodge Charger Hellcat widebody with 707 PS damn similar looks. Certainly not unintentional. Made entirely of carbon, the front apron with the lateral widening and the attachments for the fenders all around. Added to this is a powerful bonnet with power domes and large air vents that can be opened or closed with quick-release fasteners.

Carbon widebody kit all around

Widebody & 4WD! The Speedkore 1.525 PS Dodge Charger

And the apron at the rear with the two-sided air vents and diffuser and the large spoiler lip on the tailgate are made entirely of ultra-light carbon. Due to the matt finish of the rest of the body, this is only noticeable at second glance. By the way, the vehicle stands on special multi-part Bedlock-Bogart Competition-Series rims, which with their screws protect the mounted Mickey Thompson ET tires from turning slower than the rim. In view of the immense power certainly needed. And a look through the spokes of the Alus also revealed a customized huge Brembo brake system with slotted discs. And if you look closely, you can even see that the V8 disposes of its exhaust gases right and left through 2 pipes on the front apron.

Reversible sports exhaust system front and rear

Widebody & 4WD! The Speedkore 1.525 PS Dodge Charger

However, you can even switch the system and continue to use the normal sports exhaust system. But this is not original but an 3-inch-sized stainless steel system from Magna Flow in the Competition series. Many small details such as the colored Demon emblems all around, the carbon mirror caps and door handles or the remaining matt-finished parts of the body round off the spectacular look on the outside. And a lot has happened on the inside as well. However, only rather discreet. The red one immediately stands out NotausButton on the steering wheel, the fitted Roll cage or the boost leash C02 boost controller in the middle. If we receive timely information on further changes, there is of course an update for this report. You will be informed if yours is just ours Feed subscribe to. Have fun watching the pictures and stay true to us!

(Photos: SpeedKore Performance Group)

Widebody & 4WD! The Speedkore 1.525 PS Dodge Charger

Of course that had not been the case. Our tuning magazine has tens of thousands more tuning reports in stock. Do you want to see them all? Just click HERE and look around. Or are you particularly interested in the SpeedKore Performance Group? Then the following excerpt is for sure just the right thing.

Full Carbon Shelby Mustang GT350R from tuner SpeedKore

Widebody & 4WD! The Speedkore 1.525 PS Dodge Charger

1967 'Captain America' Chevrolet Camaro by Chris Evans

Widebody & 4WD! The Speedkore 1.525 PS Dodge Charger

Video: SpeedKore 1967 Chevrolet Camaro with 1.000 PS

Widebody & 4WD! The Speedkore 1.525 PS Dodge Charger

1970 Ford Mustang Boss 302 performance from SpeedKore

Widebody & 4WD! The Speedkore 1.525 PS Dodge Charger

Speedkore Dodge Charger Evolution with 979 PS

Widebody & 4WD! The Speedkore 1.525 PS Dodge Charger

Go down! SpeedKore Ford F-150 with 700 PS & Lowering

Widebody & 4WD! The Speedkore 1.525 PS Dodge Charger

Speedkore 1.525 PS Dodge Charger AWD

"Tuningblog.eu" - we keep you up to date on the subject of car tuning and car styling with our tuning magazine and present you the latest tuned vehicles from all over the world every day. It's best to subscribe to ours Feed and will automatically be informed as soon as there is something new for this post, and of course also to all other contributions.

About Thomas Wachsmuth

Thomas Wachsmuth - He has been an integral part of tuningblog.eu since 2013. His passion for cars is so intense that he invests every available penny in them. While he dreams of a BMW E31 850CSI and a Hennessey 6x6 Ford F-150, he currently drives a rather inconspicuous BMW 540i (G31/LCI). His collection of books, magazines and brochures on the subject of car tuning has now reached such proportions that he himself has become a walking reference work for the tuning scene.  More about Thomas

Leave a Comment

Your e-mail address will not be published. Required fields are marked with * marked