BBS CH-R & H & R springs in the ML Concept Audi TT

Reading time 2 Minutes

The tuning team ML Concept has published a modified Audi TT of the type 8J on its website that we would like to show you. As far as the details of the optical or technical changes are concerned, we have tried to find out some information for you and have found what we are looking for. However, we cannot say at the moment whether there are any changes. What we were able to find out and have recognized ourselves, we provide you in a small summary below. Since, as is well known, the "Forest for the trees does not see " it may well be that we missed something. Should you have noticed any further modifications compared to the production model, then we would be happy if you write us the changes in the "comment box", we will then add them to the post as soon as possible.

Ps. If you have more tuned vehicles like this one Ferrari California or even one Mercedes Benz SLS AMG from ML Concept just clicks on the photo reference below on the tuner name!

(Photos: ML Concept)

These are the details of the Audi TT type 8J:

  • 19 inch BBS CH-R alloy wheels in black with white PIN stripe (9,5 × 19 m. 255 / 35-19)
  • Brake system glossy black coated
  • Lowering (suspension springs H&R to the standard MR suspension)
  • darkened windows at the back
  • Performance increase planned
  • possibly a sports exhaust system
  • front 10mm and rear 20 mm wheel spacers

Certainly, new information and certainly new pictures and videos will soon be online. As soon as this is the case, we will of course put it online and inform you about it.

"The Tuning and Styling Blog" - we keep you up to date on the subject of car tuning and car styling with our tuning magazine and present you the latest tuned cars from all over the world every day.

Note: We ask for your understanding if not all tuning details are optimally translated. Sometimes we receive the information about the vehicles in a wide variety of national languages ​​and we have our dear need to conjure up something understandable from it. We are always grateful for corrections, so don't be afraid to share them. It's best if you subscribe to ours Feed and will automatically be informed as soon as there is something new for this post, and of course also to all other contributions. Maybe you also want to read a report from other car brands? Apart from the above manufacturer, you'll wonder what vehicles these days coilovers, alloy wheels, Chiptuning and the craziest foiling built in & attached. Have a look at the following manufacturers:
ALFA ROMEO, ALPINA, AUDI, BMWCADILLACCHEVROLET, CHRYSLER, CITROËN, DACIADAEWOODODGEFIATFORDHONDAHYUNDAIINFINITIISUZUJAGUARJEEPKIALANCIALAND ROVERLEXUSMaseratiMAZDAMERCEDESMINIMITSUBISHIANISSANOPELPEUGEOTPORSCHERENAULTSAABSEATSKODASMARTSUBARUSUZUKITATATOYOTAVAUXHALLVOLVOVW and  for ALL your others.
Enjoy browsing!

3 comments

  1. Found the comments on MY TT today. The information is correct, I just want to add that the lowering springs have been installed in addition to the standard MR chassis. Likewise, 10mm wheel spacers were processed at the front and 20mm at the rear.
    I am VERY satisfied with the advice and implementation of my wishes by ML-Concept. What will come will be shown in the future. If so, then with ML-Concept. Thanks again to Mike Lipinski.

  2. Hello Thomas.
    Today an addendum to my further planned Audi TT conversion by ML Concept. 2-fold requests
    for a visit due to too much !? Work rejected in February 2018.
    Supplementary chassis modifications were planned by means of front and rear stabilizers, strut braces if available and feasible. Otherwise, maybe this and that often turned out in conversation.
    Even a promised cost proposal with reference to feasibility or alternatives is not available to date.

    I now believe that every medal really has two sides.

    I don't like the other side at all.

    NO thanks to Mike Lipinski this time.
    Many greetings from Heinz Küppers

Leave a Comment

Your e-mail address will not be published.

de Deutsch
X