tuningblog.eu Your magazine about tuning the car
A heavy-duty drawer or cargo slip-in is a drawer slide designed to withstand even the heaviest loads. It is used in vehicles (mostly in pickups) as an aid in loading and unloading. In specially designed for transport vehicles, it may even be standard or may at least optionally be ordered ex works. In most cases, however, it is retrofitted as part of a rear extension.
Why a heavy-duty pullout?
A heavy-duty pull-out is especially useful if you often carry heavy items that can be packed into the rear compartment of the car in a complicated manner. It makes your loading and unloading of your car a lot easier. In most cases, it consists essentially only of a plate that can be on the inside of the side walls of the back of your car fixed rails and retracted. But it can also be designed in the form of a drawer. When loading you can easily lift the load on the extended plate and then retract it again. In this way, you'll save yourself from having to climb into the hold with the load, or have to bend and twist unnaturally as you lift and stow the load. When lifting heavy loads, the right posture is very important, especially if you do it often. In order to avoid damage to your spine, it is necessary to make sure that you do not bend over and lift the weight with your back, but go to your knees and use the leg muscles. However, tight holds often force you to lean or crooked. Here is a heavy load excerpt remedy.
What to consider when installing a heavy duty drawer?
Not every vehicle is suitable for the installation of a heavy duty pullout. You need a cargo bed that allows a straight extension and retraction of the platform. Suitable are therefore mainly transporters, pickups and station wagons, but not cars in which the load is lifted from the top of the trunk as for example in a sedan. Also very important is the firm anchoring of the rails on the vehicle floor / vehicle wall. If it is too loose, it can break out under load and prevent re-entry of the platform. Therefore, you should make the installation in any case professional in your workshop. The drawer can be moved so that one platform occupies the entire width of the cargo bed, or even with a rack with several compartments. Think about what is more practical for you. Especially with very wide charging pieces, the subdivision can lead to space problems. Also keep in mind that the heavy-duty pull-out has a certain amount of space even in the hold. Both the height and the width of the available storage space is reduced by him.
Which variant is the best?
It is also very important to think about what maximum weight your heavy duty pullout should be able to carry. You must not exceed this weight later when loading your vehicle. Otherwise it can come to the break of the rails. Consider also the weight of your vehicle. It must be able to balance the load when the heavy-duty pullout is fully extended. If the load is heavier than the vehicle, it may tip over and the platform will be damaged.
We hope that you the info report on the topic / term Heavy duty extract (Further designations / keywords: Pull-out shelf, Cargo Slide, rear pull-out, rear floor pull-out, rear drawer, rear drawbar rails, luggage compartment pull-out, loading aid, payload drawer, pick-up drawer, drawer rails, telescopic rail, full extension) from the field of autotuning. Our goal is that the largest German-language tuning dictionary (Tuning Wikipedia) and to explain tuning terms from A to Z easily and understandably. Almost every day we expand this lexicon and how far we are, you can HERE see. Soon the next one will be Tuning scene concept be illuminated by us. By the way, you will be informed about new topics if you have ours Feed subscribe to.
Below are a few examples from our tuning lexicon:
But of course tuningblog has countless other articles on the subject of cars & car tuning in stock. Do you want to see them all? Just click HERE and look around. We would also like to provide you with news aside from the tuning. In our category Tips, products, information & Co we pick up contributions from car or accessory manufacturers. And also our category Test sites, laws, offenses, information has almost daily new information for you. Here are a few topics from our tuning wiki:
"Tuningblog.eu" - we keep you up to date on the subject of car tuning and car styling with our tuning magazine and we present you the latest tuned vehicles from all over the world every day. It's best to subscribe to ours Feed and will automatically be informed as soon as there is something new about this post, and of course also to all other contributions.
