A form is for performing Acceptance of changes necessary. The respective change acceptance is documented in the form. The documentation is provided by a test engineer at a competent body carried out. The test engineer generally requires a to document the change acceptance Teilegutachten. If the acceptance of changes is documented successfully in the form, the form serves as proof of the approved change and this must be carried along.
Form and acceptance of changes
Part certificates are necessary if a change acceptance is to take place. A test engineer records the change acceptance in detail on a form. If the acceptance of the change is documented as approved by an officially recognized expert on the form, then this form must always be carried as evidence and presented on request. The form documents that the technical change was approved for the specified vehicle from a certain date. The form must be carried until the change that has been made and approved has been entered in the vehicle documents insofar possible. Only after the technical change has been made in the vehicle documents is the form as a document to be carried with you. If it is no longer necessary, it will be withdrawn by the registration office. Since the registration certificate Part I and Part II has existed, the acceptance can then be entered in the papers under point 22.
Test engineer checks for proper installation
An inspector for the area of motor vehicle traffic or an inspection engineer check the change acceptance and check whether the parts have been installed correctly. It is checked whether the essential requirements have been met. A parts certificate is usually necessary in order to receive a change acceptance. An old report or just a simple one Material report are often NOT sufficient to accept changes. The technical change, if made, is documented in the form.
successful entry / successful change acceptance
The following is an example of a successful entry at a DEKRA test center. A front spoiler lip and spacers at the front and rear in different dimensions were entered on the basis of a TÜV parts certificate on a BMW 5 series. The costs for both entries amounted to 82 euros (as of 06.2022)
Heads-up: It seems that there are differences in the entry in the vehicle documents depending on the state. Some admissions offices allow entries - as already mentioned - under point 22, some other admissions offices deny the possibility and point out that the form must always be carried with you. A quick phone call to the responsible registration office should clarify this.
We hope that you the info report on the topic / term Form (Further designations / keywords: Acceptance certificate, acceptance document, attachment acceptance, change acceptance certificate, change document, technical change acceptance, vehicle change, entry, entry certificate, form, test certificate, technology change) from the field of autotuning.
|
Lots of glitter on the vehicle with real Swarovski stones!
|
Belt exemption: how and why you might get it!
|
Oldtimer short report: Safe, profitable and also good?
|
Maria Holler
Maria Holler - Maria has been contributing her expertise in the area of "Laws & Legal" to tuningblog.eu since 2014. As a lawyer with a passion for the automotive world, she combines her specialist knowledge with her interest in tuning and vehicle adaptations. She ensures that readers are always informed about the latest legal framework. In her free time, she is intensively involved with legal regulations in road traffic, which makes her an indispensable resource for the tuning community.
