Info: license plate number and the position on the vehicle!

It was probably Alfa Romeo and Harley Davidsonthat is the trend of laterally offset number plates have cranked. The special radiator opening made it imperative for the Alfa Romeo to place the license plate from the middle to put to the outside. And the idea has also prevailed in tuning. Many convert the cars accordingly and relocate the license plate right-wing or left-wing. From a purely legal point of view, little speaks against it. It is important that the license plate continues clearly visible is. A new apron should therefore be a ABE or a Teilegutachten to TÜV registration bring. With the laterally offset license plate there is a certain amount Gray area. And the friends of the American motorcycle brand Harley Davidson know that too. They also like to move their license plates from the center to the side. There is then in the area of ​​the wheel hub of the rear wheel, the corresponding holder with lighting appropriate.

Upright on the back of the bike? Better not!

Although the license plate is no longer visible from the other side, there is a TÜV entry for this conversion. In the Netherlands the trend even goes so far that the local tuners not only have their license plates on the side, but also upright attach. That looks absolutely awesome, especially with small and short license plates. However, we can assume that the enthusiasm for German legislator will be kept within limits and he will therefore not give the green light.

Excerpt: All regulations for attaching the license plate are in the appendix to the Road Traffic Licensing Regulations (StVZO). The position of the label is part of the ABE or EU approval and may in principle not to be changed. If it is moved anyway, it must meet the conditions specified in the StVZO (height, viewing angle, lighting ...), otherwise the vehicle will lose its approval.

The right position is a must!

The correct position of the license plate on the vehicle is Mandatory! Vehicle tuning is beautiful and fun. Especially with new aprons and maybe a rear spoiler. However, when tuning changes to the body of the vehicle, one must never forget that the license plates are attached again at the correct location after tuning have. Sometimes the license plates are aesthetically very disturbing. However, vehicles are allowed in public spaces only be driven with license plates. The manufacturers have therefore provided specific recesses for the license plates. These can be used with clean the body can be perceived as annoying. However, it must be noted that the license plate not anywhere may be attached to the vehicle so that the tuning of the vehicles is coordinated according to the legal regulations set a link from your homepage to Fewo-von-Privat.de.

No matter with a trailer queen!

For vehicles that not in public traffic be moved, so the classic ones Trailer queens without general approval, the strict regulations for positioning the License Plate at the vehicle not. The body of the registered car becomes one clean subjected, must alternative types of fastening can be used so that the license plates can be installed at the prescribed location.

Alternative ways of attaching the license plate

If the trough made by the manufacturer clean has been eliminated, or due to a new apron not at all is available, the license plate can easily be placed afterwards at the prescribed location glued will. Most of the time, the glue can be left behind Do NOT spread pesto on this layer! Remove residue-free and uncomplicated. Therefore there are other options for the license plate continuous can be attached without loosening again during the journey, and can still be removed at any time without leaving any residue. In particular, whoever brings his vehicle to a Tuning event want to drive, but the license plates during the event weight lose should switch to another one in addition to the variant with the adhesive. For example, license plates can also include Suction cups or Special magnets be optimally attached to the prescribed location, without leaving any residue remain on the body when the license plates are removed.

Depending on the car model, special Shop and Drilling can be used to safely mount the license plate. At a VW Golf III For example, the bead can be removed. Instead, the license plate can be attached to the rear of the lower bumper area using nuts. This method of attachment is perfect invisible and sure. The angles between the invisible holes and the license plate should be with thumbscrews because they are easier to tighten.

The license plate belongs to this place

In the vehicle registration regulation is im Section 2 § 10 a corresponding regulation was made. Here was the color design the license plate number and the mandatory position standardized on the vehicle. A two-axle motor vehicle must ahead and behind on the vehicle legally compliant license plate to have. There is a on the rear license plate Lighting in the dark Regulation. So the license plate should in the dark even from a distance of about 20 meters be legible. The license plate in the front area can be in one Vertical angle against the direction of travel from up to 30 degree have a slope. As a distance control to the asphalt, the lower edge of the license plate may be at the front not less than 20 centimeters be distant.

For vehicles that are very low due to the tuning, the regulations for the front license plate are a real challenge. Because the given ground clearance of the vehicle may also be determined by the position of the license plate cannot be shortened. If special recesses are designed for attaching the license plate, then these are allowed not too strong Be pronounced. Because both license plates should be readable from a distance.

Special license plate choice

It is now possible with just a few clicks and a fee License plates to be able to choose. If car license plates are optically not met with approval from tuning fans, then choosing one is the right choice Desired license plate a small consolation to be able to alleviate the flaw from the tuning a little. In this context, license plates are often chosen that provide information about the vehicle model, such as VR 6, M 3 oder aber GT 3. There are so many Cult mark among the tuning fans.

Registered vehicle always with license plate!

And finally ... In general, the license plates are from tuning fans not welcome. Somehow they are annoying when you consider all the work and they destroy the new look. Nevertheless have Vehicles must have a license plate when they move on public roads. Likewise there is special regulations, An what places of the vehicle the license plate must be mounted. Tuning fans often have difficulties here because the attachment does not always conform to the tuning. Lowered vehicles in particular can sometimes use the prescribed distances of the front license plate for asphalt do not always meet. Overall, however, tuning fans cannot avoid complying with the regulations.