tuningblog.eu Your magazine about tuning the car
Do you have it now, the RS6 C7 sedan? Did the Ingolstadt say about before the end of the production stop of the A6 C7 (internal type designation 4G) Series, the top model RS6 but still launched as a sedan? When we arrive this blue A6 on Vossen VPS-318 rims or this one C7 Limo with 580PS think back you could almost believe it. And the PP-Parts project that we would like to introduce to you now suggests this! But unfortunately we have to disappoint you because an official RS6 sedan has not existed since the 4F model and that will probably not change with the new C8 generation. But at PP-Parts in Austria, thought has been given to this topic and, based on a 3.0 TFSI sedan, a vehicle has been conjured up that should go into series production at any time - at least if we have our way.
The result shows a perfectly finished C7 sedan which has received the look of the top model RS6. In addition, there was a beautiful multi-piece Z-Performance ZP2.1 wheelset. The project is not brand new. Already last year we have the conversion with one Video and some pictures shown but the visual changes this year have moved us to take a closer look. Two features stand out immediately, there was a new wheelset and a new paint job. The rest is almost unchanged. Should that mean the significant lowering continues to be achieved by means of adjustable airlift performance air suspension that is the boys of AH-Exclusive have blocked. The newly formed widebody body, on the other hand, is made by PP-Parts. With the help of original and sometimes elaborately adapted RS6 parts, the spectacular look of the really good soda was born. But now to the news!
The chic red paint job is called Rosso Mars and actually comes from Lamborghini Huracan or Fan. The car paint shop and plumber is responsible for the perfect paint job Ebner from 6971 Hard (Austria). The glossy black single-frame grille with the Audi logo, the housing of the LED headlights and the covers of the side mirrors are skilfully contrasted in color. Compared to 2016, there were a few noble carbon parts front and rear and black glazed taillights that beautify the rear in conjunction with a black Audi emblem. The now completely darkened windows also contribute to the new look. The new wheelset, which again comes from Z-Performance Wheels, is skilfully staged in terms of color. The A6 now has multi-part ZP.Forged 2 rims that almost fill the wider wheel arches in the dimensions 12 × 20 inches. So that the last millimeter is really used, there were 8mm track plates at the front and 5mm at the rear.
And so that the RS6 brake system with wave brake discs front and rear also has its raison d'être, there was a significant increase in performance for the 3.0-liter six-cylinder petrol engine. The supercharged engine already has 300 PS & 440 NM ex works (since 09/2014 even 333 PS) but the engine of the PP-Part A6 currently generates a whopping 510 PS and thus significantly more than the facelift S6 and almost as much as a " real “RS6. This is made possible by APR Stage 3 tuning and chip tuning software from Rrahmani Performance as well as other changes. One can already be curious what else will happen on the A6. If we get more information about the modifications, there will of course, as always, be an update for this report. It is best to subscribe to our feed and if there is something new you will be informed immediately. We hope you enjoy looking at the pictures.
(Photos: PP Parts)
These are the changes to the Audi A6:
- Performance increase on 510PS with APR Stage 3 tuning (compressor wheel, intake), chiptuning software upgrade, further changes to the hardware
- Lowering with Airlift Performance Air Suspension
- Z-Performance Wheels alloy wheels (ZP.Forged 2 rims, 12 × 20 inches ET27, 8 mm track plates front & 5 mm rear)
- RS6 brake system with Wave washers (VA 390 mm, HA 370 mm)
- Conversion to RS6 optics (original parts from RS6 Avant - bumpers / fenders etc., carbon parts front and rear,
- black glazed taillights
- machined RS6 sports exhaust system from catalytic converter
- LED headlights with black painted housings
- Slices tinted all around
- Paint in Rosso Mars red
- Full LED headlight with varnished inlet
- Interior with various carbon parts
We still have many thousands more tuning reports on tuningblog.eu, if you wanted to see an excerpt then just click HERE, And also tuned A6 4G we have a few others, following a small excerpt:
|
Audi A6 4G with 21 inch Advance Wheels AV 4.0 & KW springs
|
Audi A6 4G 3.0 V6 Bi-TDi Competition with 391PS & 732NM
|
Discreet and chic - Audi A6 4G with peppered V3 & OZ Alu's  |
20 inch & RS6 widebody
"Tuningblog.eu" - we keep you up to date on the subject of car tuning and car styling with our tuning magazine and present you the latest tuned vehicles from all over the world every day.
It's best to subscribe to ours Feed and will automatically be informed as soon as there is something new for this post, and of course also to all other contributions.
