With these tips, the bike will be fit for this season!

Thomas Wachsmuth 23 April 2022 E-Scooter, E-Bike, UTV, ATV/Quad, Moped

Reading time 4 Min.

At the latest when the temperatures become milder and the first flowers bloom, the cycling season begins again for many. But how do you actually make sure that the bike is fit for spring and summer after it has been in the garage for a long time in winter? In this article we have summarized the best care tips from the Auto Club Europe (ACE) for you!

Treat your bike to a thorough spring cleaning!

Before your first ride, you should carefully clean your bike with a brush, sponge and, if necessary, a toothbrush for the small spaces in between, as well as biological detergents. This allows possible Defects determine better. With e-bikes, you should protect the battery contacts from moisture. Definitely skip one Pressure Washer, as this can lead to damage to bearings and other sensitive areas.

Take care of the chain!

An squeaky chain can get on your last nerve, which is why you should remove dirt from the part with a brush or a dry cloth. Then treat the chain with chain oil and remove residues of the old oil with a rag. You can identify signs of wear on the chain with a so-called chain gauge, which measures the standardized distance between the chain links.

Check the brakes!

Test the braking function while stationary by braking to the left and pushing the wheel. A rear wheel that lifts off the ground indicates that the brakes are still adjusted strong enough. Now repeat the process with the right brake. Ideally, the rear wheel blocks. However, none of the brake levers should be able to be depressed right down to the handlebars. Keep a distance of at least two centimeters. With the knurled screws on the levers you can easily readjust the distance manually. If these are already at their limit, it is time to change the brake pads. It is important that no squeaking noises are noticeable when driving.

Check the functionality of the bell, light and Co.!

Don't forget to test the cable and plug connections as well, as these will quickly become loose and result in the light no longer working properly. If the lighting system on pedelecs is controlled by the on-board computer, you should do a check-up before your first ride and also include the reflectors. You should attach two yellow ones to each pedal, while there should be a white one on the front wheel and a red one on the back and wheels. In order to prepare for a larger tour or for traffic, it is advisable to do a small test lap. You will also notice whether the tires are sufficiently inflated so that you do not get flat tires. If not, then inflate according to the manufacturer's instructions.

Of course, that was far from it. Our tuning magazine has countless other tuning reports for two-wheelers in stock. We regularly deal with the topic of e-bikes, pedelecs and ATV tuning. Do you want all posts related to the topic E-scooter, e-bike, UTV, ATV / quad tuning see? Just click HERE and look around. Or is a small extract enough? Then take a look at the following three articles.