tuningblog.eu Your magazine about tuning the car
Recently updated on January 28, 2021 at 02:25 am
Daytime running lights are intended to increase road safety. Through this vehicles should be more visible. In this way, other road users can no longer overlook a car, so there are fewer accidents. Daytime running lights have been prescribed in different countries (eg in Germany) for years and must always be switched on. If this is not the case, it is a violation of the traffic rules. Fines are the result.
The regulations and the benefits
Since 2011, manufacturers have been required to equip their vehicles with daytime running lights. If you buy a used car, you are not required to retrofit it, but there are sets that can do this in the simplest way. The daytime running lights are very different from the low beam. The task of the dipped beam is to illuminate the road. Daytime running lights, on the other hand, should ensure that other drivers or pedestrians recognize the car even in bad weather, which is why accidents are avoided.
Where are daytime running lights installed and which aspects are there still?
You will find these in most cases below the headlights. In newer models, the daytime running lights are usually integrated in the headlights (see picture at the top). The daytime running lights can be started via the ignition. This means that you do not need to turn them on separately, so you can not forget activation. As the predominant technology LED bulbs have prevailed in daytime running lights. These have a high life expectancy and are reliable. In addition, they are characterized by low power consumption. But daytime running lights are also elements that are often used in the tuning scene. There are no fixed rules on what daytime running lights should look like, which is why there are many options here. Daytime running lights allow you to change the look of your car with ease, while minimizing costs and increasing safety.
Further advantages and retrofitting possibilities
The additional equipping with daytime running lights is easy. There are sets that you get in the trade. If you are technically gifted, you can install them yourself. You must connect the components to the ignition so that they activate when the ignition key is turned. Of course, garages take care of the installation and advise you comprehensively which daytime running lights are suitable for your vehicle type. The experts are guarantors that the installation succeeds. Is a bodykit desired? Then the LED lights are often directly integrated here.
Since your car is more visible after installation, there is less risk of an accident. You are now easier to see even in poor weather conditions. If you opt for special daytime running lights, you will put less strain on your car's battery. Compared to low beam, daytime running lights require around 90% less electricity. There is therefore no risk of overloading. PS. We have a little guide on how to retrofit daytime running lights in our article "Retrofitting daytime running lights on the car" put together for you.
Of course, that was far from it. tuningblog.eu has countless other articles on the subject of auto & tuning in stock. Do you want to see them all? Just click HERE and look around. But also off the tuning we want to provide you with news. Themes that go beyond the box you will find in our category Tips, products, information & Co. Following an excerpt from the last reports:
"Tuningblog.eu" - we keep you up to date on the subject of car tuning and car styling with our tuning magazine and present you the latest tuned vehicles from all over the world every day. It's best to subscribe to ours Feed and will automatically be informed as soon as there is something new for this post, and of course also to all other contributions.
