tuningblog.eu Your magazine about tuning the car
Garages are no longer just places to park cars. For many of us, they serve as workshops, storage or hobby rooms and of course small ones DIY tuning parts to install. But the floor in the rooms can go through a lot - from oil dripping from the car to heavy objects falling down. Choosing a robust and visually appealing floor coating however, can significantly improve the appearance and longevity of the garage. Among the diverse options have special Epoxy resin coatings proved particularly popular. Their durability and resistance to chemicals and daily wear and tear are unmatched. The best part? They are also easy to care for and relatively inexpensive.
Garage floor coating
A coated floor not only gives the garage a modern look, but also protects it from everyday challenges such as Cracks, abrasion and stains. Oil stains? A breeze for robust floors. In addition, many of the coatings enable a non-slip surface, reducing the risk of accidents in a wet or damp garage. For the DIY enthusiasts out there, yes, it is entirely possible to tackle the task yourself. However, it is essential to ensure that the floor is previously clean, Dry and just is. There are different ones depending on your preferences Floor coating options, including epoxy resin, polyurethane and acrylic.
While the application may be easy for some, if you are uncertain or have extensive projects, it should always be used Expert be consulted. As far as maintenance is concerned, a coated floor is maintenance. However, it is important to keep the floor clean to ensure its longevity. And yes, if necessary, the coating can renewed or just repaired become. In conclusion, a carefully selected and correctly applied floor coating can significantly improve the appearance and functionality of any garage. Because in the end, a garage is more than just a room - it is an extension of our home and one for all tuners and hobbyists second home.
Floor coatings for garages |
|||
|---|---|---|---|
| Products | Description | Materials | Notes |
Samatec |
Floor coating and primer epoxy resin | Aluminum, concrete, tiles, plaster, gypsum plaster, stone | Drying time of 12-24 hours |
| WHERE-WE |
2K epoxy resin epoxy floor coating | Concrete | For indoor concrete floors |
| aircon 2K |
2K floor coating epoxy resin | Concrete, cement, wood, metal | Double application recommended |
| Hossi's |
Garage floor coating | Concrete | Water based epoxy resin formula |
| Fonteino |
Polyurethane floor coating | concrete, steel | Chemical and abrasion resistance |
| Sikafloor |
Epoxy floor coating | Concrete, cement | High-performance coating for industrial areas |
| manadatec |
2K epoxy resin floor coating | Concrete, cement screed | Suitable for garages, basements and stairs |
| Wilckens |
Garage floor coating | concrete, screed | High abrasion resistance |
| BEKATEQ |
Acrylic polyurethane floor coating | Concrete, cement screed, steel, non-ferrous metals | Resistant to oils, fats and petrol |
| plid |
Garage floor coating | Concrete | Water, chemical and tire resistant |
Note: Table not fully visible? Then scroll sideways!
Instructions for applying a garage floor coating
1. preparation
- Clean: Thoroughly clean the floor from dust, oil, grease and other contaminants. You can use special cleaning products or a high-pressure cleaner.
- Repair: Cracks, holes or other irregularities in the concrete should be repaired before applying the coating. Special repair products for concrete floors are available from specialist retailers.
- Degrease: If the floor is smeared with oil or grease, use a degreaser to ensure the coating adheres well.
- roughening: For better adhesion of the coating, it can be helpful to slightly roughen the floor. A grinder or a concrete milling machine can be used for this.
2. Primer
- Apply a suitable primer for the floor. This ensures that the subsequent coating adheres better and ensures a uniform appearance. But first check for compatibility with the end product.
- Allow the primer to dry according to the manufacturer's instructions.
3. Mix the coating
- Many floor coatings consist of two components that must be mixed before application. Make sure to adhere to the correct mixing ratio according to the manufacturer's instructions.
- Stir the mixture thoroughly until a uniform consistency is achieved.
4. Applying the coating
- Apply the coating with a roller in even strips. It is recommended to work in small sections to ensure the coating is evenly distributed.
- Be careful not to allow puddles to form.
5. Second coat (if necessary)
- In some cases a second coat may be necessary to achieve an even and dense surface. Wait for the first coat to dry before applying the next one.
6. Curing
- Allow the coating to cure completely according to the manufacturer's instructions. During this time the floor should not be walked on or loaded with vehicles.
7. Care and Maintenance
- After the coating has completely hardened, the floor can be used normally. Clean the floor regularly to ensure its longevity.
Note: The exact steps and products may vary depending on the floor coating you choose. It is therefore important to always follow the manufacturer's instructions and recommendations. Images are AI generated for visualization
thematically relevant posts
In our category Tips, products, information & Co We have reviews of car or accessories manufacturers, new ones Tuning Wiki Terms or one or the other Leak veröffentlicht.
|
Google Maps or Waze? The ultimate navigation comparison!
|
Mirror dash cam from Vtopek: double function for double security!  |
Thanks for pointing out that sometimes a second coat of paint can't be avoided. My husband is currently renovating his old workshop. For a high-quality and long-lasting floor, we would like to turn to a professional who is very familiar with floors for industry.