A chassis connects the chassis of a vehicle with the roadway. A chassis includes the wheels, wheel carriers, wheel bearings, brakes, wheel suspension, damping, steering and suspension. Control arms are safety-relevant components that are subdivided into the sub-category of the wheel suspension in a vehicle. The function of the wishbones is to stabilize the wheels on the vehicle and to align them at the same time by counteracting the lateral forces. In this way, these components ensure the necessary stability when driving. They thus form the link between the wheel, brake, suspension and the body of the vehicle.
Wishbones in the tuning scene - what should be considered when buying and installing:
For enthusiastic tuners, lowering the vehicle is a good thing. However, it should be ensured that the wishbones already installed are dimensioned for the camber values of a factory vehicle. The lowering changes the parameters with regard to the calculated camber height and the wishbones are accordingly often undersized for lowered tuning vehicles. Due to the function of wishbones, a wishbone that is too weak represents a safety deficiency which can lead to considerable damage and, in the worst case, to accidents. It is therefore advisable and essentially unavoidable to use the factory wishbones, especially when using one coiloverto be replaced by new ones that are tailored to the new condition of the vehicle, as there is no possibility to adjust the camber of the rear wheels with the factory-fitted wishbones.
pay attention to tuning components
In the case of wishbones for tuning vehicles, none of them should end up in the shopping cart that are off the peg and were basically developed for the vehicle in its original state. You should therefore make sure that the new components are as adjustable as possible so that the required headroom can be achieved again or can be adapted to the special needs of the vehicle. In addition, it must of course be ensured that the wishbones fit the desired type. The best way to do this is to go to the specialist workshop in order to obtain expert knowledge for the conversion and installation of new wishbones. As an additional source of information, a Audit authority (TÜV, Dekra & Co.), who are usually very affine in the subject. If a tuner would like to convert or install the new wishbone on their own, when buying it, it is essential to ensure that the components are corrosion and wear-resistant. Wishbones are wearing parts, the lifespan of which depends on processing and manufacture.
We hope that you have read the info report on the topic / term wishbone (further names / keywords: Handlebars, wheel suspension, handlebar set, handlebar kit, camber adjustment, lollipop set, camber arms) from the field of autotuning. Our goal is to have the largest German-speaking tuning lexicon (Tuning Wikipedia) and to explain tuning terms from A to Z easily and understandably. Almost every day we expand this lexicon and how far we are, you can HERE see. Soon the next one will be Tuning scene concept be illuminated by us. By the way, you will be informed about new topics if you have ours Feed subscribe to.
Below are a few examples from our tuning lexicon:
But of course tuningblog has countless other articles on the subject of cars & car tuning in stock. Do you want to see them all? Just click HERE and look around. We would also like to provide you with news aside from the tuning. In our category Tips, products, information & Co we pick up contributions from car or accessory manufacturers. And also our category Test sites, laws, offenses, information has almost daily new information for you. Here are a few topics from our tuning wiki:
"Tuningblog.eu" - we keep you up to date on the subject of car tuning and car styling with our tuning magazine and we present you the latest tuned vehicles from all over the world every day. It's best to subscribe to ours Feed and will automatically be informed as soon as there is something new about this post, and of course also to all other contributions.