It is known from the famous movie series Fast and the Furious; the nitrous oxide engine the felt in the film 250.000 PS also allows so far about 68 gears forward has ^ ^. For all those who the fog effect of nitrous oxide injection reconstruct Want, there is a cheap possibility, which is CO2 Fake Purge Kit is called. And so that everyone can install such a NOS Fake Kit follows here is a small guide with the help of which you can tinker such a kit cost even in the vehicle.
HEADS-UP: We would like to use our CO2 fake purge kit guide only rough visualize how the installation and the construction has to be done. We strongly point out that we assume no liability for the correctness. We neither guarantee the timeliness and correctness, nor the completeness or quality of the information provided. Liability claims against us for material or immaterial nature that may arise as a result of the use of information in this report are generally excluded to the extent permitted by law.
Solenoid valve including connector
The solenoid valve is connected without a pressure reducer and should therefore withstand more than 60 bar. The pressure in the bottle could even exceed 60 bar with rising temperatures. So the more the better.
The container with the CO2
You also need a CO2 bottle, which comes in different sizes of 0,5 Kg or 2 kg. By the way, it is difficult to have a CO2 container with one riser to find. If you find the problem in the search for a bottle also we have a tip for you: Turn the CO2 container upside down. Attention at high temperatures, the gas expands in the container. If this is the case, the pressure increases considerably. So do not leave the container in the car in the summer and take it out. If the pressure rises above the maximum permitted limit, a small plate in the container may break. As a result, the entire CO2 will exit the container. A lot of CO2 in a closed room can cause suffocation. Comparable is the exit of CO2 with a fire in a closed room. A container with a volume of five liters costs about 6 Euro. Half a liter of CO2 is sufficient for approx. 15 impacts.
Y-piece for reduction: Only one of these is required, mostly from 6 mm to 2 x 4 mm. The Y-piece is available from many suppliers such as Conrad or on Amazon and eBay at a price often under 10 euros.
two pneumatic hoses: We also need two hoses. Both should be no more than four meters long and six millimeters in diameter. These hoses are available for example from Festo. Why the hoses should not be longer than four meters? If the hoses are longer, the mist fountains can shorten significantly.
Switch or button for triggering: These are also available at Conrad, Amazon, Ebay and many other platforms or even in the hardware store around the corner. Now you have to connect the hoses, the push button and the solenoid valve and here are also suitable hose clamps in the hardware store or online.
Laying the hoses & attaching the bottle: Of course everything has to be laid and fastened properly. A suitable position for the hoses, for the laying of the hoses and of course for the bottle is sometimes difficult to find. It all depends on the vehicle and your creativity. And of course, a use in traffic is prohibited.
There are some alternatives
This method explained by us was of course the simplest and cheapest and should explain only very rough how the installation has to be done and what are the main components. There are many more variants. There are versions that work with the help of electrical components and illuminate all the fun beyond that. And there is also a solution with CO2 capsules. There are many self-made instructions on the net and you're sure to find exactly what you need. We hope you the info report to the term CO2 fake purge kit (NOS Dummy) from the field of auto tuning has fallen. Our goal is that the largest German-language tuning dictionary (Tuning Wikipedia) and to explain tuning terms from A to Z easily and understandably. Almost every day we expand this encyclopedia and how far we are already can you HERE see. Soon the next one will be Tuning scene concept be illuminated by us. Incidentally, you will be informed about new topics if you have ours Feed subscribe to.
Below are a few examples from our tuning lexicon:
But of course tuningblog has countless other articles on the subject of cars & car tuning in stock. Do you want to see them all? Just click HERE and look around. But we also want to provide you with news outside the tuning. In our category Tips, products, information & Co we pick up contributions from car or accessory manufacturers. And also our category Test sites, laws, offenses, information has almost daily new information for you. Here are a few topics from our tuning wiki:
"Tuningblog.eu" - we keep you up to date on the subject of car tuning and car styling with our tuning magazine and present you the latest tuned vehicles from all over the world every day. It's best to subscribe to ours Feed and will automatically be informed as soon as there is something new for this post, and of course also to all other contributions.